Request Quote

P2T-12G18G-45-R-SFF-10W Active

High Power, Reflective SP2T Switch

Buy Now
Product Feature

Quantic PMI Model No. P2T-12G18G-45-R-SFF-10W is an independently controlled, high power, reflective single pole two throw switch designed to operate between 12.0 to 18.0 GHz and handle input power levels up to 10 Watts CW and 30 Watts Peak with a maximum pulse width of 1 µs and maximum PRF of 2 MHz. This switch offers low loss of 1.5 dB maximum and provides port to port isolation of 45 dB minimum. The Rise/Fall times are less than 20 ns with Delay On/Off times of less than 50 ns. The switch is controlled by two independent TTL control lines and operates at +15 V, 75 mA and -15 V, 5 mA typically. This model is supplied in a small package measuring 1.2” x 1.0” x 0.5”.

Product Specifications

General Parameters:
Status: Active
Frequency Min: 12 GHz
Frequency Max: 18 GHz
Insertion Loss (Typ): 1.5 dB Typ
2.0 dB Max
Isolation (Typ): 45 dB
Reflective / Absorptive: Reflective
Switching Speed (Typ): 60 ns
Frequency: 12.0 to 18.0 GHz
Configuration: SP2T
Isolation: 45 dB Min - Measured 45.4 dB
Insertion Loss: 1.5 dB Max - Measured 1.39 dB
VSWR In/Out: 2.0:1 - Measured 1.61:1
Switching Rage PRF: 2 MHz
Input Power: 10 Watts Max
Operating Peak Input Power: 30 Watts Max
Switching Speed: 60 ns Max - Measured 50 ns
Rise Time: 20 ns Max - Measured 20 ns
Fall Time: 20 ns Max - Measured 20 ns
Pulse Width: 1 µs Max
Delay On: 50 ns Max - Measured 50 ns
Delay Off: 50 ns Max - Measured 50 ns
Control Signal: TTL Low (0.2 VDC Nominal) = Insertion Loss,
TTL High (3.5VDC Nominal) = Isolation, Solder Pin
Power Supply: +15 V @ 100 mA Max - Measured +15 V @ 72 mA,
-15 V @ 75 mA Max - Measured -15 V @ 3 mA
Connectors: SMA (F)
Size: 1.20" x 1.00" x 0.50"
Finish: Gray epoxy polimide coating IAW MIL-C-22750, Type I over epoxy polimide primer IAW MIL-2377, Type I, Class 1 or 3
Weight: 1.5 oz Typ
Environmental Ratings:
Temperature (Operating): -55 ºC to +85 ºC
Temperature (Storage): -65 ºC to +125 ºC
Humidity: MIL-STD-202F, Method 103B Cond. B
Shock: MIL-STD-202F, Method 213B Cond. B
Vibration: MIL-STD-202F, Method 204D Cond. B
Altitude: MIL-STD-202F, Method 105C Cond. B
Temperature Cycle: MIL-STD-202F, Method 107D Cond. A
SourcePricePurchase
3795 USDBuy Now