PMI Model No. PL-MCU-ENET-TTL-14-10B-1U is an Ethernet Microcontroller Test Box which allows for an ethernet command to be sent up to 140 parallel TTL output bits. Fourteen 15-Pin D-Subminiature connectors are provided to control fourteen 10-Bit devices. +15 VDC is also provided on each connector to provide up to 50 Watts total to the external devices. A custom GUI is provided along with operating instructions with commands to allow the user to write their own GUI for direct control.
Quick Links: (click the links below for additional information)
Product Feature
Test Report
Specifications:
| Size | 10.06" x 17.06" x 1.73" (1U Chassis to fit in a 19" Rack) |
| Connectors | AC Receptacle
D-15 Female(x14) |
| Output Connector | D-15 Female Pin 1 - TTL6 Pin 2 - TTL5 Pin 3 - TTL4 Pin 4 - TTL3 Pin 5 - GND Pin 6 - TTL2 Pin 7 - TTL1 Pin 8 - GND Pin 9 - NC Pin 10 - NC Pin 11 - +15VDC Pin 12 - TTL10 Pin 13 - TTL9 Pin 14 - TTL8 Pin 15 - TTL7 |
| Ethernet Connector | RJ-45 |
| Power Supply | 100-120 VAC/60Hz |
| IP Address | Factory Preset |
| Finish | Powder Coated Blue with Silkscreen |
Environmental Ratings:
| Temperature: | -40 ºC to +70 ºC Operating |
| Humidity: | 5% to 95% Noncondensing |