RX Frequency Range (J1) | 9.41 GHz +/- 30 MHz |
RX Power Range (J1) | -100 dBm to 0 dBm |
RX High Pass Filter (J1) | 8.0 GHz Corner Frequency Nom |
LO Input Frequency (J2) | 3.803 GHz +/- 15 MHz |
LO Input Power (J2) | +5 dBm to +7 dBm |
LO Band Pass Filter (J2) | 7.2 to 8.5 GHz (-3 dB IL Nom) |
LO Frequency to Mixer (J2) | 7.610 GHz +/- 30 MHz |
IF Output Power (J3) | 13 dBm Max |
IF Frequency (J3) | 1.8 GHz +/-10 MHz |
IF Bandpass Filter (J3) | 75 MHz Passband (-3dB Nom) |
VSWR | 1.5:1 Max (1.3:1 Preferred) |
Noise Figure at Input (J1) | 8 dB Max |
Gain (J1 to J3) | 10 dB Min, 13 dB Max |
Group Delay Ripple (J1 to J3) | -0.1 ns / 20 MHz |
OP3 (Output) | >25 dBm (>28 dBm Preffered) |
OP2 (Output) | >15 dBm (>18 dBm Preffered) |
Output Signal Distortion | The module must be unconditionally stable when terminated at J1, J2 and J3 with a short circuit in all phases |
Stability | Now apparent droop or distortion with a pulse width of 500 to 1000 ns at 500 to 2000 pps. |
Power Supply | +12 V @ 1A Max |
Power Supply Rejection | 0.1 dB/Volt Max |
RF Connectors | SMA (F) |
Size | 1.8" x 1.15" x 0.4" |