Request Quote

Model No. ADM-10M18G-SFF-110VAC

PMI Model No. ADM-1018G-SFF-110VAC is a state-of-the-art 10 MHz to 18.0 GHz integrated subsystem that allows users to input RF signals and provide automatic detection when signal levels fall below -30 dBm and automatically switch in a low noise amplifier such that low level signals can remain detectable.  The purpose of this module is to provide optimum RF signal levels to a RF/fiber converter module.  The unit is powered by standard 100 VAC.  The RF input is via a sma female connector and the output is via a sma female connector.  the product is configured such that the end user can change the value of the fixed attenuator level by changing the internal sma screw-on attenuator such that in system optimization can be done.

Quick Links: (click the links below for additional information)

Product Feature

Typical Characteristics

Specifications:

Frequency Range10.0 MHz to 18.0 GHz
RF Input Power

1 Watt CW (+30 dBm) Max

Threshold Level-30 dBm
Insertion Loss (Input to Output)19 dB Typ (RF input > -29 dBm & with internal fixed 
12 dB attenuator)
RF Gain (Input to Output)15 dB Typ (RF input < -31 dBm & with internal fixed attenuator)
Noise Figure

37 dB Typ (with no LNA selected & >500 MHz)

11 dB Typ (with LNA selected & > 500 MHz)

Output P1dB1.5 dBm (with internal fixed 12 dB attenuator)
Internal Switch Isolation4 0 dB Typ
Gain To No Gain, Switching Speed<1.5 µs Typ and per timing diagram
Internal Fixed Attenuator Value12 dB (user changeable for in-system optimization)
AC Power110 VAC, 60 GHz (waterproof receptacle, female sockets, 3 positions)
RF Input ConnectorSMA (F)
RF Output ConnectorSMA (F)
Size6.0" x 5.0" x 1.5"
SealingInternally sealed - weather proof
FinishPainted Blue
 

Environmental:

Temperature: -20 °C to +50 °C (Operating)
 -40 °C to +85 °C (Storage)
Humidity MIL-STD-202F, Method 103B, Condition B
Shock

 MIL-STD-202F, Method 213B, Condition B

Vibration MIL-STD-202F, Method 105C, Condition B
Altitude MIL-STD-202F, Method 105C, Condition B
Temperature Cycle MIL-STD-202F, Method 107D, Condition A