Frequency Range | 18.0 to 40.0 GHz |
Gain | 3 dB Min, 7 dB Max - Measured 2.5 to 6.5 dB |
Amplitude Ripple | ±1.0 dB over every 500 MHz Band starting @ 18.0 GHz, excluding the crossover Measured: ±0.68 dB CH1 ±0.59 dB CH2 ±0.60 dB CH3 ±0.51 dB CH4 (Worst Case) |
Input P1dB | -20 dBm Min - Measured 5 dBm (Worst Case) |
Input IP3 | -10 dBm, +5 dBm Desired - Measured +3.5 dBm (Worst Case 40 GHz) |
Channel to Channel Isolation | 50 dB Typ - Measured 49.9 dB |
Noise Figure | 12 dB Typ - Measured 10 dB |
Phase Matching | 40 degree RMS, Channels 2,3,4 to REF. Channel 1, Over Operating Temp Measured 30 Deg. RMS (Worst Case) |
Phase Tracking | 0.25 deg/ºC Port to Port Typ - Measured 0.22 Deg/C° |
mmW/uW Limiter | 30 dBm, CW or Pulsed, 2.0 to 40.0 GHz Without Damage, All Inputs Measured 30 dBm |
Limiter 1dB Recovery Time | 250 ns - Measured 146 ns |
Spurious Products | -73 dBm - Measured -74 dBm Measured at Spectrum Analyzer Noise floor |
Diplexer K Band 1dB Passband | 18.0 GHz Min, 25.0 GHz Max |
Diplexer Ka Band 1dB Passband | 28.0 GHz Min, 40.0 GHz Max |
Crossover Band | 25.0 GHz Min, 28.0 GHz Max |
Crossover Excess Attenuation | 5 dB Typ - Measured 5 dB (Worst Case) |
Stopband Attenuation | 60 dB - Measured 61 dB (Worst Case) |
K Band Stopbands | 900 MHz to 15.0 GHz, 32.0 GHz to 46.0 GHz |
Ka Band Stopband | 900 MHz to 22.0 GHz |
Comm Band Attenuation | 60 dB - Measured >60 dB |
Comm Band | 900 MHz to 2.5 GHz |
Comm Interference Immunity | 36 dBm CW, 900 MHz to 2.5 GHz without Limiter or Amplifier Saturation Measured 36 dBm Based On filter Rejection |
Comm Interference Immunity | 53 dBm Pulsed RF, 900 MHz to 2.5 GHz, Without Limiter or Amplifier Saturation - Measured 53 dBm Based On filter Rejection |
VSWR in Passbands | 2.5:1 Typ |
Harmonics for -20dBm | -80 dBm, 15.0 to 40.0 GHz - Measured -84 dBm |
Band Switching Time, Required | 1 µs Max, 0.5 µs Typ - Measured 400 ns |
Power Divider Input Power | 20 dBm Max - Measured 20 dBm |
Power Divider Insertion Loss | 15 ± 3 dB - Measured 15 dB, ±2 dB |
Power Divider Phase Ripple | ±5° RMS - Measured ±4° RMS |
Band Select Protection Circuitry | ±15 V |
Power Supply Protection Circuitry on both ±6.0VDC Supplies | ±15 V |
Power Supply Voltage | ±6.0 VDC - Measured +6.0 V @ 0.571 A, -6.0 V @ 0.132 A |
Power Consumption Required | 5 W Max - Measured 4.2 W |
Connectors | 2.92mm (F) |
Control Connector | (MDM-9PSP) 9 Pin Micro-D Shipped with Mating Connector |
Size | 3.0" x 8.0" x 0.75" |